TinyDX Config WB2CBA · V1.5

Configures the four operating frequencies (2 bands × FT8/FT4) and the Si5351 calibration factor, stored in the radio's EEPROM. TinyDX supports 14 MHz (20 m) – 30 MHz (10 m) only. TX also depends on the fitted low-pass filter. Use a Chromium browser (Chrome/Edge); Android uses a WebUSB fallback for FTDI adapters.

Not connected

Band 1 · FT8 MHz

Band 1 · FT4 MHz

Band 2 · FT8 MHz

Band 2 · FT4 MHz

Calibration ppb

Firmware update bundled V1.5

Flashes the bundled firmware to the radio via its bootloader. Keep the USB cable connected and do not unplug during the update. Your saved frequencies and calibration (EEPROM) are preserved. Desktop Chrome/Edge is fully supported; Android (WebUSB) is best-effort.

Serial log

Serial-port abstraction (Web Serial + FTDI WebUSB fallback) adapted from ok1cdj/FT8web.

TinyDX config page & V1.5 firmware by Ondrej Kolonicny, OK1CDJ.